Google
 

Monday, February 04, 2008

Milling Table

Got some time to prepare the milling table over the weekend. I decided to mount the 16mm T5083 aluminum onto the table. This plate will act as a milling table. A 5mm hole is drilled in grid arrangement and tapped so the clamp can be attached easily. I also decided to mount the monitor onto the window grille using a swivel LCD mount.





Few weeks ago, I added a stiffening plate to the Y axis. I also replaced the stepper motor connector on the controller to a locking type. This will prevent the motor connection from becoming loose.




No comments: